Pianos routinely make movers yearly list of items that are most frequently harmed. Grand pianos are particularly bothersome. Practicing the following treatments for disassembling, padding and loading grand pianos will avoid damage, lower claims expense, and enhance customer fulfillment.
1) A minimum of three people are required to deal with a child grand piano. If the infant grand piano needs to increase or down stairs or if a full or concert grand piano requires to be carried, a minimum of four individuals are required.
2) Constantly finish a thorough and precise stock. It may be preferable or required to use a visual stock to adequately explain and reveal pre-existing damage.
3) As various parts are taken apart, please place all hardware in an effectively identified parts bag and after that put the parts bag in a "Components Box".
4) Eliminate the music rack (lyre) from its track by pulling it towards the keyboard. Wrap it in a tidy furnishings pad.
5) Detach the lid by removing the hinge pins. Have one individual wiggle the lid, holding it opposite the hinge, while a second person works the pin loose. Please take care not to damage the wood with the pliers or with the pin itself. Cover the jaws of the pliers with a little fabric to help prevent damage to the wood if required. Wrap the lid in a tidy furnishings pad.
6) Remove the prop that holds the cover open and cover it in a clean furnishings pad. The prop has a hinge pin and is in two pieces.
7) Remove the pedal assembly and cover it in a clean furniture pad. The braces at the back of the assembly rest in slots at each end. When eliminating the screws, please beware not to drop the braces. In addition, please be specifically mindful with the push-rods so that they will not get bent. As you face the piano, number the push-rods from delegated right as "1", "2", and "3", by putting a piece of masking tape with the appropriate number on each rod. Keep in mind: If masking tape is unavailable, please use properly identified parts bags for this purpose. When reassembling at location, please be sure to put the rods in the right order so that the pedals will work properly.
8) Pad the piano by positioning a tidy rolled furnishings pad (stretch-wrap the pad to avoid it from unrolling) on the cover of the keyboard to avoid it from tumbling open while you deal with the piano. Keep in mind: Please make sure that the surface area of the piano is dust-free prior to padding it.
9) Position a piano board and connect the straps so that it is prepared to receive the piano. The raised brace on the piano board must be at the keyboard end of the piano.
10) Remove the left front leg by positioning a single person underneath the piano at the left end of the keyboard. The other 2 individuals must support the left front corner. The person below the piano must turn the maintaining block so that the long end points far from the leg. The screws, if there are any, must then be eliminated. The "underneath" individual must then get out from under the piano before actually getting rid of the leg. Make sure to have 2 individuals lifting the corner of the piano while the 3rd person gets rid of the leg. Keep in mind: Please be sure to keep in mind which legs were removed from which positions given that some pianos have legs that are not interchangeable.
11) Location the piano on the piano board by decreasing the "leg-less" end onto the board. Please be sure to raise the entire piano somewhat while finishing this maneuver to avoid unnecessary pressure on the remaining, attached legs as the piano suggestions. Be sure that the piano is centered snugly against the brace at the end of the piano board.
12) Remove the two staying legs and cover them in clean furniture pads. These legs are held in location by a "essential and slot" arrangement. To eliminate the leg, slide it inward toward the center of the piano until it comes out of the slot.
13) Protect the piano to the piano board by bringing completions of the straps together and securing them. Place folded burlap pads over the furnishings pads however under the straps to provide extra defense to the edges of the piano. To avoid the strap near the narrow why not find out more end of the piano from slipping off, tie the loose ends of the 2 straps together.
14) To move the piano over a flat, level surface area, tilt the piano and piano board and place a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, use the piano board as a skid. After sufficiently padding the stairs for protection against residence damage, place the keyboard end of the piano towards the bottom of the stairs. Connect a hump strap to the top end of the piano board to prevent the piano from slipping.
16) To fill the piano, leave it on the piano board and place it in a tier as the first base item with the keyboard dealing with the wall of the preceding tier. The very best location to load the padded lid is between the piano and the preceding tier or in between the piano and the wall.
Although grand pianos represent a substantial difficulty, they can be moved without damage by utilizing common sense and practicing the treatments noted above.